CARTES D'EXTENSION VERDEX

NETPRO-vx
Features

10/100baseT ethernet
802.11b/g optional

Connection

 80-pin bus header
Power
 Standard 3.5V - 6V input
Dimensions
 93mm x 20mm
* Using LAN9117 Ethernet controller.
ADD Wifi
wifi FCC module - snaps on to netpro-vx
wifi EU module - snaps on to netpro-vx

Wifi FCC
Features

- 802.11(b) and 802.11(g) wireless communications*
- easy installation
Channels

1-11
Standards

- The FCC designation indicates that the wireless communications meets FCC standards
Connection
 snaps on to the netmicroSD-vx and netpro-vx expansion boards only
Dimensions
 20mm x 20mm
* Utilizing the Marvell 88W8385 module for 802.11(b) and 802.11(g) more
**** this product comes with one wifi antenna.

Wifi EU
Features

- 802.11(b) and 802.11(g) wireless communications*
- easy installation
Connection
 snaps on to the netmicroSD-vx and netpro-vx expansion boards only
Channels
 1-13
Standards
 The EU designation indicates that the wireless communications meets EU standards
Dimensions
 20mm x 20mm
* Utilizing the Marvell 88W8385 module for 802.11(b) and 802.11(g) more
**** this product comes with one wifi antenna.
The EU designation indicates that the wireless communications meets EU standards.

AUDIOSTIX 2
Ideal for recording or playing back sound tracks in a wide variety of devices and robots. Needs to be connected to any gumstix COM. Features the Philips UCB1400 and OSS AC97 driver.
Features

- LCD in/out
- Audio in/out
- USB client
- 4 GPIO
Connection
 60-pin I/O header
Power
 3.5V - 5V
Note: LCD signals expansion boards are LCD capable after do-it-yourself soldering and wiring.

BREAKOUT-vx
Easy access to the GPIO lines on the verdex COMs. Ideal for product development.
Features

- i2c, power and 23 GPIOs via 40 pin header on 0.100" centers
- USB mini-B connector with USB Host signals
- Power and 22 LCD signals, (18 LCD data and 4 LCD control) via through-holes
- Serial function ports or GPIO lines and an I2C port on 0.100" through-holes
Connection
 60-pin I/O header
Size
 80x20mm
Power
 3.5V - 5V
*Recommended to be used with 5v wall adapters to power as USB host
Note: LCD signals expansion boards are LCD capable after do-it-yourself soldering and wiring.

CONSOLE-vx
Add console access and a power input port to a verdex pro or verdex COM. Also allows USB connection upstream to a host computer.
Features

- 3 x RS-232 ports on miniDIN8 connectors
- USB mini-B connector with USB Host signals
- 18-bit LCD with FH21 footprint (24pin)
- Serial function ports or GPIO lines and an I2C port on 0.100" through-holes
Connection
 60-pin I/O header
Size
 80x34mm
Power
 3.5V - 5V
*Recommended to be used with 5v wall adapters to power as USB host
Note: LCD signals expansion boards are LCD capable after do-it-yourself soldering and wiring.

CONSOLE-LCD-vx

Add an LCD screen to your gumstix solution with this expansion board to make one of the world's smallest and lowest cost Linux computers. Opens up a world of possibilities.
Features

- 3 x RS-232 ports on miniDIN8 connectors
- USB mini-B connector with USB Host signals
- LCD-ready
- Touchscreen controller
- Provides 18 bits per pixel
- Serial function ports or GPIO lines and an I2C port on 0.100" through-holes.
Connection
 60-pin I/O header
45-pin connector for 4.3" Samsung LCD panel
Size
 80x34mm
Power
 3.5V - 5V
*Recommended to be used with 5v wall adapters. Power over USB not provided.

CONSOLE-LCD-16vx

Get 16-bit color highcolor with this expansion board and an LCD screen to make one of the world's smallest and lowest cost Linux computers. Opens up a world of possibilities.
Features

- 3 x RS-232 ports on miniDIN8 connectors
- USB mini-B connector with USB Host signals
- LCD-ready
- Touchscreen controller
- Provides 16 bits per pixel
- Serial function ports or GPIO lines and an I2C port on 0.100" through-holes
Connection
 60-pin I/O header
45-pin connector for 4.3" Samsung LCD panel
Size
 80x34mm
Power
 3.5V - 5V
*Recommended to be used with 5v wall adapters. Power over USB not provided.
For 18 bits per pixel, use the consoleLCD-vx board

CONSOLE-st
Provides console access and a power input port to verdex pro and all gumstix bluetooth-enabled motherboards. Also allows USB connection upstream to a host computer.
Features
 - 2 serial ports
- USB client - mini-B socket
Connection

60-pin I/O header
Power
 Standard 3.5V - 6V input

GPS stix
Used world wide by customers with location based solutions and tracking requirements. Also comes with full audio capabilities.
Features
 - GPS
- Audio in/out
- LCD
- USB client
- 4 GPIO
Connection
 60-pin I/O header
Power
 3.5V - 5V
For more information about GPSstix visit our FAQ's
Note: LCD signals expansion boards are LCD capable after do-it-yourself soldering and wiring.

JTAG pro
To reflash your verdex pro COM (Linux experts only)
Features

- possibility for gumstix JTAG-host no software support
- spring-loaded connectors (verdex testpoints only)
- 20-pin connector for wiggler
Connection
 60-pin Hirose connector
Size
 80x34mm

JTAG-vx
To reflash your verdex COM (Linux experts only).
Features

- possibility for gumstix JTAG-host no software support
- spring-loaded connectors (verdex testpoints only)
- 20-pin connector for wiggler
Connection
 60-pin Hirose connector
Size
 80x34mm

ROBOAUDIO-TH
To the highly useful robostix board, add audio capabilities for your robotics application.
Features
 - on board Audio
- I2C Bus
- SPI
Connection
 60-pin I/O header
Power
 Standard 5V - 6V
Many open-source programs now available .
Robostix runs code as a stand-alone microcontroller or attach it to a gumstix platform through the 60-pin connector for maximum programming capabilities. robostix also connects to your existing computer using a digikey ISP cable for In Systems Programming

ROBOSTIX
The highly successful robotics board from gumstix. Designed from the ground up with the gumstix robotics community, this expansion board has been used worldwide by everyone from students to experts in the field.
Features
 - I2C Bus
- SPI
Connection
 60-pin I/O header
Power
 Standard 5V - 6V
Many open-source programs now available .
Rrobostix runs code as a stand-alone microcontroller or attach it to a gumstix platform through the 60-pin connector for maximum programming capabilities. robostix also connects to your existing computer using a digikey ISP cable for In Systems Programming

ROBOSTIX-TH
The highly successful robotics board from gumstix. Designed from the ground up with the gumstix robotics community, this expansion board has been used worldwide by everyone from students to experts in the field.
Features
 - I2C Bus
- SPI
Connection
 60-pin I/O header
Power
 Standard 5V - 6V
Many open-source programs now available .
Rrobostix runs code as a stand-alone microcontroller or attach it to a gumstix platform through the 60-pin connector for maximum programming capabilities. robostix also connects to your existing computer using a digikey ISP cable for In Systems Programming

TWEENER
Use extensively by programmers during the development stage. Usually sandwiched between a gumstix COM and the console or breakout boards.
Features
Provides RS232 serial connection for audio or robotic configurations.
Connects between a basix, connex or verdex COM and a 60-pin expansion board: "in between.
Connection
60-pin I/O header (male)
60-pin I/O header (female)
Power
Standard 3.5V - 6V input
*Please note that the tweener expansion board cannot be used on a verdex COM connected with either the netmicroSD-vx or netwifimicro-SD expansion boards. The expansion boards' Ethernet jack physically blocks the tweener expansion board.